3-10
E
3-9
■
IP router Port Forwarding setting can be designated at the Application &
Gaming ➞ Port Range Forward page.
■
As the Example in the figure, designate the TCP and UDP Port to the
SCC-C6475(P) camera that is connected to the IP router.
Each port that is set to the IP router should be set to the Port number that is
set at the SCC-C6475(P) IP setup page.
■
After completing the Port Forwarding setting to the SCC-C6475(P), Click the
Save Settings and save the setting value.
■
Completing the above setting, User can access the SCC-C6475(P) and
monitor the monitoring image by using the Local PC connected to the IP
router and also monitor the image to access the external IP router Remote
PC.
- In case of accessing in the Local PC, user can access it by using the
private IP (Example: 192.168.1.200) designated to SCC-C6475(P).
- IP or DDNS address of the IP router in case of accessing in the External
Remote PC. Access using (Example: cfffe42.websamsung.net).
■
DDNS Address is composed of 6 figures at the end of SCC-C6475(P) MAC
Address, Alphabet 'c', and the combination of domain name
“websamsung.net”.
Example) If the MAC Address of SCC-C6475(P) is 00:00:f0:ff:fe:42,
DDNS Address = c + fffe42 + websamsung.net =
cfffe42.websamsung.net
■
If the user use the IP router and configure network in the LAN environment,
set in the menu of the IP router.
■
To access the setup menu of the IP router, enter the IP router access
address in the Local PC internet browser connected to the IP router.
(Example: http://192.168.1.1)
- Please assign the Local PC window network setting as the following
example.
Example) IP: 192.168.1.2
Subnet mask: 255.255.255.0
Gateway: 192.168.1.1
■
When accessing the IP router address, window to ask the password
appears. Do not enter anything in the User Name and enter the ‘admin’ in
the password and press ‘OK’, the IP router setting page appears.
■
Select ‘Static IP’ in the Setup ➞ Basic Setup as figure, enter the valid IP
and Subnet Mask, Gateway, DNS that is possible to connect the internet.
Contact the Network manager about the setting value.
2) In case of using the LAN and IP router
Komentáře k této Příručce