Samsung SCC-C6475P Uživatelský manuál stáhnout pdf (Strana 14)

100

101

2-9

2-8

7. [Figure 7] Match the 3 holes on the

back of the CAMERA and the

CONNECTOR and turn it left about

15 degrees.

(Check the sound of LOCKING

and that the LEVER-LOCKING

is in place)

* Use the screws (BH M3 x L8) to

connect the CAMERA and the

ADAPTER so they don't move.

[Figure 7]

8. [Figure 8] Assemble the

COVER-BODY onto the DOME.

[Figure 8]

5. [Figure 5] Match the

Bracket anchor and CAMERA

ADAPTER and use 4screws

(PH M4 x 8) to assemble them.

[Figure 5]

6. Pull the safety wire from the case

body, and assembly it to the

camera holder.

[Figure 6]

3. [Figure 2] Assemble the

BRKT-ANCHOR on the ceiling

and screw the 4 bolts in.

[Figure 2]

2. Make a hole in the ceiling where the camera will be installed.

(The hole should be about

185)

4. [Figure 3,4] Connect the various cables to the CAMERA ADAPTER.

(See page 2-4)

[Figure 4]

[Figure 3]

[Figure 1]

Length of

ceiling Hole

1. [Figure 1] Install the structure on the

ceiling.

(Refer to Installation reference

for the Length of the structure)

* Built in by the builder of the structure

Installing the Camera

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 340 341

Komentáře k této Příručce

Žádné komentáře

Samsung SCC-C6475P Uživatelský manuál Strana 14

Komentáře k této Příručce

Související produkty a manuály pro Bezpečnostní kamery Samsung SCC-C6475P