Samsung 275C - SRP Two-color Dot-matrix Printer Servisní příručka stáhnout pdf (Strana 21)

Rev. 2.00

- 21 -

SRP-275

2-3-4 Changing the DIP Switch setting

If you need to change settings, follow the steps below to make your changes.

CAUTION

Turn off the printer before removing the DIP Switch cover to prevent an electric short, which can damage

the printer.

1) Make sure the printer is turned off.

2) Remove the screw from the DIP Switch cover.

Then take off the DIP Switch cover, which is shown in the illustration below.

3) Set the switches using a pointed tool, such as tweezers or a small.

4) Replace the DIP Switch cover. Then secure it with the screw.

NOTES

The new settings take effect when you turn on the printer.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 135 136

Žádné komentáře

Samsung 275C - SRP Two-color Dot-matrix Printer Servisní příručka Strana 21