Samsung AQV10UWEN Uživatelský manuál stáhnout pdf (Strana 38)

Fixing the indoor unit in place

Insulation

Pipes

'X' mm

Rubber leg

'Y' mm

Perform the following work on the area where gas leak test was done priorly.

After checking for gas leaks in the system, insulate the pipe, hose and cables.

Then place the indoor unit on the installation plate.

1. To avoid condensation problems, wrap foam insulation (as shown in the gure) on a

part without insulation on the end of the pipes.

2. Wind the pipe, assembly cable and drain hose with vinyl tape.

3. Place the bundle (the pipe, assembly cable and drain hose) in the lower part of

the indoor unit carefully so it does not project from the rear of the indoor unit.

4. Hook the indoor unit to the installation plate and move the unit to the right and

left until it is securely in place.

Install the outdoor unit in level on a stable base to avoid the generation of noise and

vibration, especially when installing the unit close to a neighbor.

If you install the outdoor unit in a place exposed to strong winds or at a height, x it to an

appropriate support (wall or ground).

1. Place the outdoor unit as indicated on the top of the unit to let the discharged air

out properly.

2. Fix the outdoor unit in level to an appropriate support using anchor bolts.

3. If the outdoor unit is exposed to strong winds, install shield plates around the

outdoor unit so that the fan can operate correctly.

5. Wrap the rest of the pipe with vinyl tape.

6. Attach the pipe to the wall using clamps (optional).

Installation

plate

Connecting wires

Connecting

pipes

Vinyl tape

Drain hose

• Makesurepipedoesnotmovewhenyouinstalltheindooruniton

an installation plate.

Fixing the outdoor unit in place

• Ensurethewallwillbeabletosuspendtheweightofrackand

outdoorunit;

• Installtherackclosetothecolumnasmuchaspossible;

• Installpropergrommetinordertoreducenoiseandresidual

vibration transferred by outdoor unit towards wall.

Outdoor unit installed on the wall by rack

Soft rubber designed to cut off

vibration from rack to wall.

(not supplied with product)

Designed to cut off residual vibration

from outdoor unit to rack.

(not supplied with product)

• Securetherubberlegtopreventthegenerationofnoiseandvibration.

Model X Y



09/10/12



538 290



18/24



660 340

Vivaldi MAX_AQV09&12U@@ IB&IM_32450A_E.indd 38 2011-3-5 15:26:41

1 2 ... 33 34 35 36 37 38 39 40 41 42 43

Komentáře k této Příručce

Žádné komentáře

Samsung AQV10UWEN Uživatelský manuál Strana 38

Komentáře k této Příručce

Související produkty a manuály pro Split-systém klimatizace Samsung AQV10UWEN