Samsung ML-2250 Uživatelský manuál stáhnout pdf (Strana 3)

1. Place the cartridge with the handle facing up.

Remove the five top cover screws.

REQUIRED TOOLS

Toner approved vacuum

A small common screwdriver

A Phillips head screwdriver

Needle nose pliers

REQUIRED SUPPLIES

New replacement toner for use in Samsung ML-2250 (135g for 5,000 pgs)

Conductive grease

Drum lubricating powder

2. On the front edge of the cartridge, there are two tabs.

Press the two tabs in, and lift the front edge of the cover up.

3. Next to the handle of the cartridge (right and left), there are

two more plastic tabs. GENTLY press them in, and remove

the cover.

CAUTION: The upper half of the toner hopper is

being removed. If there is a lot of toner left in the hopper, it can

dump out all over! Vacuum the hopper clean.

4. With the toner hopper away from you, remove the four

screws on the left side end cap. Remove the end cap.

SAMSUNG ML-2250 TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS

UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact [email protected]

www.uninetimaging.com

1 2 3 4 5 6 7 8 9 10 11

Komentáře k této Příručce

Žádné komentáře

Samsung ML-2250 Uživatelský manuál Strana 3

Komentáře k této Příručce

Související produkty a manuály pro Software Samsung ML-2250