Samsung SSA-S2000W Uživatelský manuál

SSA-S2000 Series

10The Flash memory of each shipped SSA-S2000/S2000W contains a minimum set of defaulted values, but it does not have any other preprogrammedvalues or

113) Registration of PIN ONLY MODE 4) Registration of RF/PIN Combination MODE(1) Apply 12VDC to the unit.All 3 LEDs will be flashing along with a powe

12No Command Action/Change setting values No Command Action/Change setting values1 11 Add User Access Cards (RF CARD ONLY MODE) 31 48 Disable Unlock f

131) Initialization by Master Card1) Present Master Card on the reader.2) Press “99” + “ENT”3) All data will be erased.2) Hardware Initialization (Whe

14Step 11) Turn the power off2) Short Orange & Orange with white stripe wires3) Turn the power on4) 3 color LED blinking with beep sound indicates

2 125KHz Standalone Proximity & PIN Single Door Access Controller 512 Users including One Master Card 1 External Reader Port for Exit : 26bit W

32. SpecificationModel SSA-S2000 / 2000W NoteCPU Dual 8bit MicroprocessorMemoryProgram Memory 20KByte ROMData Memory 2KByte EEPROMID User 512 UsersRea

4DC +12V(Red)GND (Black )4.1 Power Connection4.2 Exit Button ConnectionYellow with Red stripeDoor Contact ConnectionGreenCOMNCNOCOMNOGND (Black )PIR

5NO(Blue with White stripe)NC(White with Red stripe)NO (Purple)NC(Purple with White stripe)COM (White)XAlarm-+Alarm Connection4.4 Door Lock Connection

6No. Description Cable NameMaximum Distance ①DC +12V Power  SSA-S2000Belden #9409, 18 AWG2 conductor, unshielded30m②Reader (Power & Data)Extra Re

7 • When the Main Unit operates in Selection Mode, LED  is flashing.• When a registered Card (or PIN) is read or exit button is pressed, LED  w

8Signal ColorPowerMain Power (+12V) +12V RedPower Ground (GND) 0V BlackOutputDoor Relay Out (COM) COM(RL1) Gray with Red stripeDoor Relay Out (NC) NC(

9RS232 DRIVER/RECEIVERRS232C_TXDRS232C_RXDRS485 TRANCEIVERMICOM 8bit processor11.0592MHzREADER INPUT I/FEX_RD_WIK0EX_RD_WIK1SERIAL EEPROMSYSTEM Power1