Samsung SPC-2010 Uživatelský manuál stáhnout pdf (Strana 22)

using the menu

22_ using the menu

PRESET

Move the camera to a pre-determined point.

To set a preset

1. Using the joystick and controller buttons, move the camera to a desired location.

2. Enter a preset number.

3. Hold down the [PRESET] button for 2 seconds to save the preset location.

To execute the preset

1. Select a camera.

2. Enter a desired number(s) using the number buttons and press [PRESET].

3. The preset will be executed.



You can select preset numbers from 1 to 255 using the controller. The maximum preset location number varies

depending on the camera model. (For more information, please refer to your camera’s user manual.)



You can set up preset locations in the OSD menu of the camera.

GROUP

You can make a group of multiple presets before calling them in sequence.

To set a group

1. Enter the group number.

2. Press the [GROUP] button to activate the Group mode.



To pause the Group mode, move the joystick.



In order to use Group modes, you must set up the modes in the camera’s OSD menu prior to actual operation.



Group function is available only for SAMSUNG-T/E protocol.

SAMSUNG-E protocol allows SCAN function.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 39 40

Žádné komentáře

Samsung SPC-2010 Uživatelský manuál Strana 22