Samsung SCX-1150F Uživatelský manuál

HomeVisit us at: www.samsungelectronics.com/mfpP/N: JB68-00696A Rev. 3.00SCX-1150F

1 S ET U P Thank you for purchasing the Samsung SCX-1150F InkJet All in One. This multifunctional product provides printing, copying, scanning, and

5.5FAXNOTES: • The SUPERFINE resolution is not activated when the document is required to pre-scan into memory before sending, for example, when the S

5.6FAXSetting Default Resolution and ContrastYou can set the default contrast and resolution for outgoing faxes. The default setting is normally appli

5.7FAXSending a Fax Automatically1Feed the document(s) to be faxed face up into the ADF until “DOCUMENT READY” appears in the display.OrPlace a single

5.8FAXConfirming a TransmissionWhen the last document has been sent successfully, the product beeps and returns to Standby mode.If something went wron

5.9FAXSending a Fax ManuallyManual sending allows you to talk to the other party before sending the document. This method is useful if the other party

5.10FAXRedialThe memory in your product retains the last 10 numbers called, and the last 30 numbers received, provided the CLI (Caller Line Identifica

5.11FAXTo view and dial any of the last numbers you received:1Press and hold Redial/Pause for 2 seconds. The display shows “REDIAL” on the bottom line

5.12FAX3Press SAVE Toll. The display prompts you to enter the fax number.4Enter the number of the remote fax machine using the number keypad. You can

5.13FAXReceiving a FaxNOTE: If you installed a photo cartridge in your product, the received faxes will not print out. The display shows “MEMORY RECEI

5.14FAX• In DRPD mode, you can receive a call using the Distinctive Ring Pattern Detection (DRPD) feature. “Distinctive Ring” is a telephone company s

1.2 Set Up Setting Up Your ProductContentsBelow is what is included with your product.SCX-1150F Colour and Black ink cartridgesTelephone line cord*Po

5.15FAXReceiving Automatically in FAX Mode Your product is preset to FAX mode at the factory. If you have changed the fax mode, take the following ste

5.16FAXNOTES: • If you have set your product to ANS/FAX mode and your answering machine is switched off, or no answering machine is connected to your

5.17FAXReceiving Using DRPD FeatureYou can not set DRPD (Distinctive Ring Pattern Detection) as the receive mode using the Receive Mode button on the

5.18FAXUsing Fax ForwardingYou can set your product to forward incoming faxes to another fax number during a specified time period. When the fax arriv

5.19FAX6Enter the time using the number keypad you want to start forwarding incoming faxes and then press Enter.7Enter the date using the number keypa

5.20FAXAutomatic DiallingOne-touch DiallingOne-touch dialling lets you use any of the 10 one-touch buttons to automatically dial a number. Storing a N

5.21FAX5To store more telephone numbers, press another one-touch button and repeat steps 2 through 4.OrTo return to Standby mode, press Cancel/Reset.S

5.22FAXSpeed DiallingYou can store up to 90 numbers in 2-digit Speed Dial locations (01-90). Storing a Number for Speed Dialling1Press and hold Speed

5.23FAXSending a Fax using a Speed Number1Feed the document(s) to be faxed face up into the ADF until “DOCUMENT READY” appears in the display.OrPlace

5.24FAXGroup DiallingIf you frequently send the same document to several destinations, you can create a group of these destinations and set them under

1.3Set Up Control Locations and FunctionsTake a moment to familiarize yourself with the main components of your product.Front View Paper Output Tray E

5.25FAX6Repeat step 5 to enter another speed dial number into the group.7When you have entered all the desired numbers, press Cancel/Reset. The displa

5.26FAXSearching for a Number in the Memory There are two ways to search for a number in the memory. You can either scan from A to Z sequentially, or

5.27FAXSearching with a Particular First Letter1Press Search/Delete, then press the button labelled with the letter you want to search for. A name beg

5.28FAXAdvanced FaxNOTES: • You cannot use a colour fax for all advanced fax features.• When you select resolution for advanced faxes, do not select S

5.29FAX6Enter the number of the remote fax machine using the number keypad.You can also press a one-touch button including group dial buttons, or pres

5.30FAXDelayed FaxYou can set your product to send a fax at a later time when you will not be present. NOTE: You cannot use the colour fax for the del

5.31FAX8If you want to send to more than one location, select “1:YES”, and enter another fax number using the number keypad. You can also press a one-

5.32FAX14If the document is fed from the document glass, the display shows “NEXT GO ON?” on the top line after the document is scanned into the memory

5.33FAX1Feed the document(s) to be faxed face up into the ADF until “DOCUMENT READY” appears in the display.OrPlace a single document on the document

5.34FAX9Press Enter. The document will be scanned into the memory before transmission. The display shows the memory capacity and the number of pages b

1.4Set UpRear ViewTop ViewUSBConnectorADF(Automatic DocumentFeeder) ConnectorParallelConnectorAC PowerSocketTelephoneConnectionsConnector DoorTo acces

5.35FAX1Feed the document(s) to be faxed face up into the ADF until “DOCUMENT READY” appears in the display.OrPlace a single document on the document

5.36FAXWhen all pages are scanned, press Cancel/Reset when the display shows “NEXT GO ON?.”8The product returns to Standby mode and the display shows

5.37FAXAdding Documents To a Scheduled OperationYou can add documents to the delayed transmission previously reserved in your product’s memory.1Feed t

5.38FAXIf you the document is fed from the document glass, the display shows “NEXT GO ON?” on the top line after the document is scanned into the memo

5.39FAXAdditional FeaturesPrinting ReportsYour product can print reports containing useful information – Schedule Job, System Data, etc. The following

5.40FAXSchedule InformationThis list shows the document currently stored for Delayed Sending, Priority Sending, Group Sending, and TX polling. The lis

5.41FAXPrinting List1Press Setup. The display shows “1.SYSTEM SETUP” on the bottom line.2Press the Scroll buttons ( or ) repeatedly until you see “5

5.42FAX5Choose the desired status by pressing the Scroll buttons ( or ) repeatedly, and then press Enter to save the selection. 6Repeat to set other

5.43FAX• AUTO REDUCTION : When receiving a document as long or longer than the paper loaded in your product, the product can reduce the received data

5.44FAX• STAMP RCV. NAME : Allows the product to automatically print the page number, and the date and time of the reception at the bottom of each pag

1.5Set UpOperation Panel Button Functions1Allows you to save ink to a maximum of 50% by printing images lighter (available in PC print, Copy, and Fax

5.45FAXWith the DRPD feature active, “DRPD” appears in the display and the previously set reception mode is ignored. If you turn DRPD off, the product

5.46FAX• JUNK FAX BARRIER : With this feature set to ON, the system will not accept a fax sent from the remote station of which the fax number is stor

5.47FAXUsing the Fax Settings UtilityWhen you install the MFP driver, the Fax Settings Utility is automatically installed. With this program, you can

5.48FAXSettings TabUsing the Settings tab on the Fax Settings Utility dialogue box, you can set up the fax name and number, and configure the fax setu

5.49FAXPhonebook TabUsing the Phonebook tab, you can store the speed dial numbers (for details on speed dialling, see page 5.22).•Get Phonebook: gets

5.50FAXNOTE

5.51FAX

5.52FAX

6MAINTENANCEThis chapter provides suggestions for high-quality and economical printing and information for maintaining the print cartridge and your pr

6.2MaintenanceMaintaining Print Cartridges To get the maximum benefit from your print cartridges:• Do not remove a print cartridge from its packaging

1.6Set Up4Displays current status and prompts during operation.Enters menu mode.Scrolls through the menu items. Also used to adjust the volume.Confirm

6.3MaintenanceViewing Ink LevelYou can view the ink level on the LCD display using the operation panel buttons. Take the following steps:1Press Setup.

6.4MaintenancePrinting a Cleaning Page from the Product 1Press Setup. The display shows “1.SYSTEM SETUP” on the bottom line.2Press the Scroll buttons

6.5MaintenancePrinting a Cleaning Page from Your Computer1Click Start > Programs > Samsung SCX-1150 Series > Printer Control Program. 2The S

6.6MaintenanceCleaning Print Cartridge NozzlesIf print quality does not improve after repeatedly printing the cleaning page, the problem may be caused

6.7Maintenance3Use a clean cloth, dampened with water only, to gently clean the entire copper coloured area, including the nozzles and contacts.To dis

6.8MaintenanceCleaning Cartridge Holder Contacts1Open the cartridge door by grabbing the door handle at the top edge.2After the print cartridges have

6.9Maintenance4Use a CLEAN, DRY CLOTH to clean the print cartridge contacts inside the printer.5Reinstall the print cartridges, then close the cartrid

6.10MaintenanceThere are two types of black and colour cartridge: Standard and High yield. Before proceeding to install, you need to check which cartr

6.11MaintenanceReplacing Print Cartridges from the Product1Carefully unwrap the new ink cartridge(s) and remove the sealing tape. Slowly pull straight

6.12Maintenance3Locate the print cartridge holder inside the product. The black (or photo) ink cartridge holder is located on the right side of the ca

1.7Set UpChoosing a LocationTo achieve trouble-free operation of your product, place it on a flat, stable surface near your workstation. Leave enough

6.13Maintenance7The display prompts you to confirm a new or an old cartridge. Press the Scroll buttons ( or ) to scroll through the options and pres

6.14Maintenance4When you finish installing cartridge(s), click the appropriate buttons in the Samsung SCX-1150 Series dialogue box to confirm the type

6.15MaintenanceAligning Print Cartridges You must align the black and colour print cartridges after installing a new print cartridge or if the black p

6.16Maintenance5From each group on the form, locate the number under the alignment pattern that comes closest to forming a perfectly straight line. 6T

6.17Maintenance4The product feeds a sheet of paper and prints the Alignment Cartridge form. The Align Cartridges dialogue box appears.5Locate the numb

6.18MaintenanceClearing MemoryYou can selectively clear information stored in your product’s memory.1Press Setup. The display shows “1.SYSTEM SETUP” o

6.19MaintenanceRemote TestThe Remote Test feature allows your product to be checked out by a service company at a remote place by phone.1Press Setup.

6.20MaintenanceCleaning the Document Glass To keep your product working properly, occasionally clean the document glass.Clean the document glass with

7TROUBLESHOOTINGThis chapter gives helpful information for what to do if you encounter an error. This chapter includes:•Clearing Document Jams•Clearin

7.2TroubleshootingClearing Document JamsIf a document jams while it is feeding through the ADF, “DOCUMENT JAM” appears in the display.Details for clea

1.8Set Up2Connect the supplied telephone line to the LINE jack and the other end to the wall jack.If you want to use your product for receiving both f

7.3TroubleshootingExit Misfeed1Open the document cover and turn the roller knob to remove the misfeed documents from the exit area.If the jammed docum

7.4TroubleshootingClearing Paper JamsIf paper jams occur, “REMOVE PAPER JAM AND PRESS CANCEL” appears in the display. Follow the steps below to clear

7.5Troubleshooting5If the paper jams as it exits to the paper output tray, remove the jammed paper by pulling gently on the paper.6Press Cancel/Reset

7.6TroubleshootingTips for Avoiding Paper JamsBy carefully selecting print materials and loading them properly, you should be able to avoid most paper

7.7TroubleshootingLCD Error MessagesLCD Display Meaning SolutionCHECK CARTRIDGES CHECK LEFT CARTRIDGECHECK RIGHT CARTRIDGEThe indicated ink cartridge

7.8TroubleshootingCID NUM. EMPTY You have attempted to register a junk fax number when the CID list is empty.The CID list is created when Caller Line

7.9TroubleshootingPOLLING ERROR The remote fax machine you want to poll is not ready to respond to your poll.OrWhen setting up to poll another fax mac

7.10TroubleshootingFixing ProblemsFax ProblemsSymptom Cause and SolutionThe product is not working, there is no display and the buttons are not workin

7.11TroubleshootingThe incoming fax has blank spaces or you received a poor-quality copy.• The fax machine sending you the fax may be faulty. • The fa

7.12TroubleshootingPaper Feeding ProblemsSymptom Cause and SolutionPaper is jammed during printing.Clear the paper jam. See page 7.4.Paper sticks toge

1.9Set Up3Connect the printer cable. Use either the USB cable that came with your product or an IEEE-1284 compliant parallel cable purchased separatel

7.13TroubleshootingGeneral Printing ProblemsSymptom Cause and SolutionYour product does not print.• The printer cable is not connected properly. Check

7.14TroubleshootingPart of the printed page is blank.• The page layout is too complex. Simplify the page layout and remove any unnecessary graphics fr

7.15TroubleshootingColour Printing ProblemsSymptom Cause and SolutionYour product prints only in black.• The Samsung SCX-1150 Series printer driver ma

7.16TroubleshootingPrint Quality ProblemsSymptom Cause and SolutionLight print or fade • The print cartridge may be running out of ink. Install a new

7.17TroubleshootingCharacters with white lines• The print cartridge may be almost empty. Check the contacts of the print cartridge and replace, if nec

7.18TroubleshootingScanning ProblemsSymptom Cause and SolutionThe scanner does not scan.• Make sure you place the document to be scanned face down on

8APPENDIXThis chapter includes:•Printer Specification•Scanner and Copier Specification•Fax Specification•General Specification•Paper Specification•Rep

8.2AppendixPrinter SpecificationScanner and Copier SpecificationItem DescriptionEmulation HBP(GDI)ResolutionTrue 600 x 1200 dpi, 2400(H) x 1200(V) dpi

8.3AppendixFax SpecificationItem DescriptionApplicable line G3 PSTN (Public Switched Telephone Network)CompatibilityITU Group 3ResolutionStandard: 203

8.4AppendixGeneral SpecificationItem DescriptionInput paper tray capacity 100 sheets (Maximum)Stacking Height : 9 mmOutput tray capacityMaximum 30 She

1.10Set Up5Connect the power cord. Plug one end of the supplied three-wire electrical grounding type cord into the back of the product and the other e

8.5AppendixPaper SpecificationItem DescriptionPaper types availablePlain paper, OHP film, Label, Envelope, Card, PostcardPaper sizesPaper Type W x L (

8.6AppendixA Sample of ITU 5% Chart (reduced to 60%)

8.7AppendixReplacing the Fitted Plug (UK)ImportantThe mains lead for this machine is fitted with a standard (BS 1363) 13 amp plug and has a 13 amp fus

8.8AppendixNotes For Use of This Device (New Zealand)The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has acce

8.9AppendixDeclaration of Conformity (European Countries)Approvals and CertificationsThe CE marking applied to this product symbolises Samsung Electro

8.10AppendixFax Branding (US)The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic devi

8.11Appendixtelephone line should be less than five in order to assure proper service from the telephone company. In some cases, a sum of five may not

8.12Appendix NOTE

INDEXAAC power 1.10ADF, load 3.4alignment, cartridges 6.15automatic dial 5.20Bblack copy 1.5, 3.7black fax 1.6, 5.7booklet, print 2.11broadcasting 5.2

Ggroup dial 5.24Hhandout, print 2.13Iink level, viewfrom control program 2.18from operation panel 6.3ink save 1.43installcartridges 1.13software 1.18s

Important Precautions and Safety Information When using this product, these basic safety precautions should always be followed to reduce risk of fire

1.11Set UpLoading PaperThe display will show “ADD PAPER THEN PRESS ENTER” if no paper is loaded when starting to print a job. The paper bin can hold a

Rreceive mode, fax 5.13redialcount 5.43interval 5.43remote test 6.19reports, print 5.39resolutionfax 5.4print 2.10reverse page order 2.10ringer volume

1.12Set Up3Squeeze the left paper guide and move it to the right to match the width of the paper.4Pull the output tray and the output tray extender on

1.13Set UpInstalling Print CartridgesYour product comes with a black and a colour cartridge. You can purchase an optional photo cartridge and install

1.14Set Up3The cartridge holder moves to the install position. The colour cartridge is inserted into the left side of the cartridge holder and can be

1.15Set Up6Unwrap and remove the black print cartridge from its plastic bag. Holding the cartridge at the top, carefully remove the sealing tape cover

1.16Set Up9When you close the door, the display shows “CARTRIDGE CHANGED? NO.” Press the Scroll buttons ( or ) until you see “BOTH” at the bottom r

1.17Set Up15Looking at the Cartridge Alignment form, identify the straightest line in Alignment A. Using the number keypad, enter the two digit number

1.18Set UpInstalling SoftwareAbout Samsung SoftwareYou must install the SmarThru CD-ROM after you have setup your product and connected it to your com

1.19Set UpSystem RequirementsBefore you begin, ensure your system meets the minimum requirements.Supported Operating SystemWindows 95 OSR2/Windows 98/

1.20Set UpInstalling Samsung SoftwareNOTES: • For Windows 95/98/Me/2000/XP users, cancel the “New Hardware Found” screen when the computer boots up.•

12 Your product may have a heavy cover for optimal pressure on the document for the best scanning and/or faxing (usually the flatbed-type product). I

1.21Set Up4The SmarThru installation supports three types of setup:• Typical: Program will be installed with the most common options and is recommende

1.22Set Up6You can choose SmarThru networking option. This feature allows you to share the modems on your computer and the scan device SCX-1150F via a

1.23Set Up7Click Next.8When the installation is completed, shut down and restart your computer. If your computer does not shut down and restart automa

1.24Set UpConfiguring Fax and Internet Gates If you select SmarThru networking Server option (see page 1.22), when your computer restarts after the Sa

1.25Set Up3Enter your name and e-mail address, then click Next. The e-mail address will have been assigned to you by your Internet service provider.4E

1.26Set Up5Enter your account name and password to access your Internet mail server, then click Next. Your Internet service provider will be able to p

1.27Set Up7Click Finish to quit the wizard and enable Internet e-mail service.NOTE: If you wish, you can reconfigure the Internet gate later by using

1.28Set UpUninstalling Samsung SoftwareUninstall is required if you are upgrading the software or if your installation fails. You can uninstall all so

1.29Set Up3When your computer confirms your selection, click Yes. The selected printer driver and all its components are removed from your computer.4W

1.30Set Up3When your computer asks you to confirm your selection, click Yes. The Uninstall Options dialog box appears.Uninstall options are:• Backup a

i Contents C ONTENTS Important Precautions and Safety Information ... i Chapter 1: S ET U P Setting Up Your Product ...

1.31Set Up5Follow the on-screen instructions to complete the uninstallation. The SmarThru software and all components will be removed. 6When uninstall

1.32Set UpUsing the SmarThru CD-ROMYou can uninstall both the MFP driver and the SmarThru software with the CD-ROM you have used to install the softwa

1.33Set UpBasic System SetupSetting Date and TimeIf you are setting up the product for the first time, or if the product has been unplugged for an ext

1.34Set UpTake the following steps to enter your current date and time:1A flashing cursor prompts you to enter the date. Use the number keypad to ente

1.35Set UpChanging Date FormatYour product displays the current date in Europe format. Europe format displays the date in the order of Day-Month-Year.

1.36Set UpSetting Fax Number and NameIn some countries you are required by law to indicate your fax number on any fax you send. The fax number and nam

1.37Set UpHow To Enter Characters Using the Number KeypadAs you perform various tasks, you’ll need to enter a name. For example, when you set up your

1.38Set UpKeypad Character AssignmentEditing Numbers or NamesIf you make a mistake, move the cursor under the wrong character by pressing the Scroll b

1.39Set UpChanging the Display LanguageTo change the language that is used on the LCD display, take the following steps:1Press Setup on the operation

1.40Set UpSetting the Discard SizeWhen receiving or copying a document as long as or longer than the paper loaded in the paper bin, you can set the pr

ii ContentsSetting Dialling Mode ... 1.42Using Save Mode ...

1.41Set UpSetting SoundsYou can set the following sounds:• Ringer Volume: You can adjust the ringer volume. Choose from HIGH, MED, LOW, or OFF. OFF se

1.42Set UpSetting Dialling ModeYou can select the type of telephone dial system your product is connected to. NOTE: The Dialling Mode setting may be u

1.43Set UpUsing Save ModeInk SaveThe Ink Save feature allows the printer to use less ink on each page. Activating this mode will extend the life of th

1.44Set UpPower Save Your product reduces power consumption when it is not in actual use. This Power Save Mode setting allows you to select the length

2PRINTRead this chapter to learn how to select and load print media and how to use the print settings. The topics included in this chapter are:•Paper

2.2PrintPaper SelectionOne of the most important things you can do to assure the best possible printing performance of your product is to select the c

2.3PrintNOTE: When you print on these special type of media, you have to set the selected paper type in your application. See page 2.10.Guidelines for

2.4Print• Store unused media at temperatures between 59 and 86 oF (15 to 30 oC). The relative humidity should be between 10% and 70%.• If the print de

2.5PrintPaper GuidelinesWhen loading paper, envelopes, or other special media, keep these guidelines in mind:• Attempting to print on damp, curled, wr

2.6PrintPrinting a DocumentThis procedure describes the general steps required for printing from various Windows applications. The exact steps for pri

iii ContentsChanging Default Settings ... 3.15Blocking Colour Copying ...

2.7Print5Click OK to close the Properties dialog box.6After making any necessary changes to the printing parameters, click OK to start the print job.A

2.8PrintPrinter SettingsYou can use the product with all your Windows 95/98/Me/2000/XP or Windows NT 4.0 applications. Be sure to set Samsung SCX-1150

2.9PrintWindows 2000/XP• Select the File > Print > Properties or File > Print Setup command from within any Windows application.Or• Select Sa

2.10PrintPaper Tab Use the Paper tab to select what size paper you have in your printer, the orientation, the number of copies to print, etc.Document/

2.11PrintJob Finishing TabThe Job Finishing tab provides options for you to adjust how the document will appear on the printed page. Job Finishing opt

2.12PrintOnce your document prints, stack the bundles and bind the booklet.1Take the first bundle from the paper output tray, fold it in half, and set

2.13PrintHandoutChoose the Handout option to print multiple pages on a single sheet of paper.Two-Sided PrintingChoose the Two-sided printing option fr

2.14PrintAdvanced TabThe Advanced tab allows you to change how the printer handles colour printing. You should rarely need to change these settings.Pr

2.15PrintColor TabUse the Color tab for optimising the graphic and colour print job. You can adjust halftone shading, brightness and contrast. You can

2.16PrintPrinter Properties Tabs (Windows 2000/XP)Paper Quality TabThis tab allows you to select paper source, paper type, print quality, and colour.

iv ContentsGroup Dialling ... 5.24Setting Group Dial ...

2.17PrintPrinter Properties Buttons & Icons• Click OK when done reviewing or making changes.• Click Cancel if you want to exit the tab menus witho

2.18PrintStatus TabThe Status tab gives you general status information on the printer. You will see this window when the printer is printing (unless y

2.19PrintCartridges TabThe Cartridges tab gives you access to several different cartridge functions. From here, you can install new cartridges, change

2.20PrintNOTE

3COPYYou can use your product like a standard copier. You don’t even have to turn your computer on. The buttons on the operation panel let you make al

3.2CopySetting Paper Size and TypeFirst make sure you have paper loaded, following the instructions in “Loading Paper” on page 1.11. Then you have to

3.3CopyPaper TypeYou can use special media such as inkjet, transparency, and photo paper as well as plain paper. After loading any special type of med

3.4CopyUsing Automatic Document Feeder (ADF)1Insert your document face up, with the top edge leading into the ADF. Adjust the document guides to the w

3.5CopyUsing Document Glass1Open the document cover.2Place the document face down on the document glass. Position it so the horizontal and vertical ed

3.6CopyIf you want to copy or scan a book:You can remove the top cover to place an original document such as a book. Lift the cover straight up to rem

v Contents Chapter 7: T ROUBLESHOOTING Clearing Document Jams ... 7.2Input Misfeed ...

3.7CopyCopying a DocumentFollow these steps to copy using the operation panel:1Feed the document(s) to be copied face up into the ADF until “DOCUMENT

3.8CopySetting Copy OptionsThe following buttons on the operation panel let you make all the basic settings: copy quality, contrast, number of copies

3.9CopyContrastYou can adjust the contrast for a document containing faint markings or dark images or photographs using the Contrast button. You can s

3.10CopyZoom rateYou can reduce or enlarge the size of a copied image from 25% to 400% using the Zoom Rate button on the operation panel. To select th

3.11Copy6If you selected “COLLATE ON”, the next display prompts you to select the print order. Press the Scroll button ( or ) to select “NORMAL” or

3.12CopyFit to Page1Place a single document on the document glass face down then close the cover.For details on loading an original document, see page

3.13Copy7Press Start Copy Black to begin black and white copying. To make a colour copy, press Start Copy Color.NOTE: When making a clone, the zoom ra

3.14Copy4Press the Scroll buttons ( or ) until you see “POSTER” on the bottom line of the display, then press Enter.5Press the Scroll buttons ( or

3.15CopyChanging Default SettingsThe copy options including copy quality, contrast, number of copies and copy size can be set to the most frequently u

3.16CopyBlocking Colour CopyingYou can prevent unauthorized use of colour copying by requiring a special PIN (Personal Identification Number) to use c

vi Contents NOTE

4SCANScanning with the Samsung SCX-1150F lets you turn pictures and text into digital files on your computer. Then you can fax or e-mail the files, di

4.2ScanScanning BasicsYour SCX-1150F offers three ways to start scanning. These include:• From the Samsung SmarThru software: Launch Samsung SmarThru

4.3Scan2Feed the document(s) to be copied face up into the ADF until “DOCUMENT READY” appears in the display.OrPlace a single document on the document

4.4Scan4The Samsung SmarThru launches automatically and the Scan Wizard window opens.The Scan Wizard lets you use the following services:• ScanLets yo

4.5Scan• Scan to OCRLets you scan the original documents and pass them to the OCR program. OCR (Optical Character Recognition) is the process of conve

4.6ScanScanning Process with TWAIN-enabled Software If you want to scan documents using another software, you will have to use TWAIN-compliant softwar

5FAXThis chapter includes:•Sending a Fax•Receiving a Fax•Automatic Dialling•Advanced Fax•Additional Features

5.2FAXSending a FaxPreparing Documents for FaxingUse the following guidelines to prepare your documents for faxing:• Do not attempt to feed the follow

5.3FAXLoading Document(s) You can use the Automatic Document Feeder (ADF) or the document glass to load an original document for faxing. Your ADF can

5.4FAXAdjusting Quality of Your FaxWhen setting typical text based documents, your product enables you to send documents that are very close to the qu