Samsung UA40J5200AK Uživatelský manuál Strana 83

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 145
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 82
82 83
Fine-Tuning the Screen
Broadcasting > Channel Settings > Fine Tune
Try Now
"
Available for analogue broadcasts only.
Analogue pictures can become shaky and full of noise. If this happens, you can fine-tune the signal
and/or reduce noise to clear up the picture.
1.
Select Channel Settings > Fine Tune. An adjustment bar appears on the screen.
2.
Press the
l
or
r
button to make adjustments. Select Save or Close to apply the new setting.
Select Reset to reset the Fine-Tune operation.
Transfer Channel List
Broadcasting > Channel Settings > Transfer Channel List
Imports or exports the channel map. When the PIN input screen appears, enter the PIN.
"
Availability depends on the specific model and area.
You should connect a USB storage device to use this function.
Import from USB: Import channel list from USB.
Export to USB: Export channel list to USB. This function is available when USB is connected.
Satellite System
"
Availability depends on the specific model and area.
Broadcasting > Channel Settings > Satellite System
A set of satellite dish settings must be configured for each wanted satellite before performing a
channel scan.
Satellite System is available when Aerial is set to Satellite. When the PIN input screen appears, enter
the PIN.
Satellite Selection: You can choose the satellites for this TV.
LNB Power: Enables or disables the power supply for the LNB.
LNB Settings: Configures the outdoor equipment.
Satellite: Selects the satellite for receiving digital broadcasts.
Transponder: Selects a transponder from the list or adds a new transponder.
DiSEqC Mode: Selects DiSEqC mode for the selected LNB.
Lower LNB Oscillators: Sets the LNB oscillators to a lower frequency.
Upper LNB Oscillators: Sets the LNB oscillators to a higher frequency.
Tone 22 kHz: Selects the Tone 22 kHz depending on the LNB type. For a universal LNB it should
be Auto.
Zobrazit stránku 82
1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 144 145

Komentáře k této Příručce

Žádné komentáře