Samsung SP-F10M Specifikace stáhnout pdf (Strana 41)

Using 3-4

3-4 LED Indications

LED Indications

:Light is On :Light is Blinking :Light is Off

STATUS LED STAND BY STATUS

Power has been supplied properly. To operate the projector, press the

[POWER] button on the projector or remote control and wait for around 30 sec-

onds.

The projector is operating normally.

The projector is preparing an operation after the [POWER] button on the projec-

tor or the remote control has been pressed.

The [POWER] button has been pressed to turn off the projector, and the cool-

ing system is in operation to cool off the inside of the projector. (Operates for

about 3 seconds.)

The cooling fan inside the projector is not operating normally. Refer to Action 1

in Clearing Indicator Problems below.

The projector has changed to Cooling mode because its internal temperature

has increased beyond the maintenance limit.

Refer to Action 2 in Clearing Indicator Problems below.

The projector has turned itself off automatically because its internal tempera-

ture has increased beyond the maintenance limit. Refer to Action 3 in Clearing

Indicator Problems below.

There is a problem with the operation of the LED. Refer to Action 4 below.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 91 92

Žádné komentáře

Samsung SP-F10M Specifikace Strana 41