Samsung ML-1200 Series Uživatelský manuál Strana 83
- Strana / 128
- Tabulka s obsahem
- ŘEŠENÍ PROBLÉMŮ
- KNIHY
Hodnocené. / 5. Na základě hodnocení zákazníků
PROBLEM SOLVING
7.6
Clearing Paper Jams
Occasionally, paper can become jammed during a print job. Some of the causes include:
• The paper tray is loaded improperly or overfilled.
• The paper tray has been pulled out during a print job.
• The top cover has been opened during a print job.
• Paper that does not meet paper specifications has been used. See “Paper Specifications” on
page A.2.
• Paper that is outside of the supported size range has been used. See “Paper Specifications”.
If a paper jam occurs, the Paper and the Error lights remain lit on the control panel. Find
and remove the jammed paper. If the location of the paper jam is not obvious, look inside the
printer.
Note: Paper jams in this area may result in loose toner on the page. If you get any toner on your
clothes, wash them in cold water as hot water will set the toner into the fabric.
Output Area
1
Pull the jammed paper carefully from
the output stacker.
- Contents 3
- Maintaining Your Printer 4
- Printing Tasks 4
- Problem Solving 4
- Appendix 4
- Laser Safety Statement 5
- Ozone Safety 6
- Power Saver 6
- Radio Frequency Emissions 7
- Approvals and Certifications 8
- ◆ Special Features 9
- ◆ Printer Components 9
- Special Features 10
- Printer Components 12
- Inside View 13
- Rear View 13
- Unpack Your Printer 15
- Install the Toner Cartridge 16
- Loading Paper 18
- Load Paper 19
- Parallel Cable (ML-1210 Only) 20
- Turn on the Printer 21
- Print a Demo Page! 21
- Install the Printer Software 22
- How do I remove the 25
- Making Installation Diskettes 27
- SETTING UP YOUR PRINTER 28
- ◆ Control Panel Buttons 30
- ◆ Control Panel Lights 30
- Control Panel Buttons 31
- Control Panel Lights 33
- PRINT MEDIA 35
- Media Sizes and Capacities 36
- Paper Guidelines 37
- Selecting the Output Location 38
- Printing on Envelopes 41
- Printing on Heavy Paper 43
- Printing on Labels 44
- Printing on Transparencies 45
- Printing on Preprinted Paper 46
- Printing on Card Stocks 47
- Printing a Document 49
- PRINTING TASKS 51
- Canceling a Print Job 53
- Using Help 53
- Using Toner Save Mode 54
- One Sheet of Paper 55
- Printing Posters 57
- Setting Graphic Properties 59
- Darkness 60
- Reprint When Jam 60
- Altitude Correction 60
- Power Save Mode 60
- Printing Watermarks 61
- To create or edit a 62
- To delete a watermark 63
- Using Page Overlay 64
- Deleting a Page Overlay 67
- Reprinting the Last Page 68
- Setting Up the Host Computer 69
- Setting Up Client PC 70
- ◆ Cleaning the Printer 71
- MAINTAINING YOUR PRINTER 72
- Redistributing Toner 73
- Toner Cartridge 74
- Cleaning the Printer 75
- Printing a cleaning sheet 76
- Troubleshooting Checklist 78
- Possible Cause 79
- Solution 79
- PROBLEM SOLVING 82
- Clearing Paper Jams 83
- Input Area 84
- Inside the Printer 85
- Tips for Avoiding Paper Jams 87
- Print Quality Checklist 88
- Toner specs 89
- Dropouts 89
- Vertical lines 89
- Gray background 90
- Toner smear 90
- Vertical repetitive defects 90
- Misformed characters 91
- Page skew 91
- Background scatter 91
- Curl or wave 92
- Wrinkles or creases 92
- Back of printouts are dirty 92
- Black pages 92
- Character Voids 93
- Loose toner 93
- Horizontal stripes 93
- Printer Light Patterns 94
- Door open 95
- Canceling a job or memory out 95
- LSU error 95
- Engine Over Heat error 96
- System error(No Heat error) 96
- Open Fuser error 96
- Common Windows Problems 97
- Printer Specifications 99
- Paper Specifications 100
- Supported Sizes of Paper 101
- Guidelines for Using Paper 102
- Paper Output Capacity 103
- Envelopes 105
- Transparencies 107
- 1. Install PCL driver 108
- 3. Install USB driver 109
- 2. Connect printer 109
- APPENDIX 110
- 4. Set your PC printer 111
- 1. Connecting USB 112
- 2. Installing USB driver 112
- System Requirements 115
- Installing Software 116
- Printing from a Macintosh 117
- Advanced Printing 120
- Background Printing 121
- Paper Source 121
- Linux Driver Installation 122
- 2. Install the Ghostscript 123
- 3. Install setup script 123
- 4. Set up the printer filter 124
- Visit us at: 128
- Rev.3.00 128
Související produkty a manuály pro Laserové / LED tiskárny Samsung ML-1200 Series
(65 stránky)
(94 stránky)© 2020, manymanuals.cz. Všechna práva vyhrazena. | 0.250 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentáře k této Příručce